David
Brown Parts
David
Brown PartsEngine
| Part No | Description |
Thumbnails |
Prices |
|---|---|---|---|
|
|
Filters
|
|
|
|
12021 |
Felt, for early tractors with
aluminium filter housing |
|
£18.50 |
|
GP172 |
Late Cropmaster, 25, 30, 900, early
950 etc., vertical type |
|
£8.00 |
|
12029 |
Cork gasket for lid on housing using both above filters |
£2.75 | |
|
902125 |
Horizontal bowl type, most 3 cyl.
engines & 4 cyl. engines late 950 onward except for post 1979 models
with spin-on filter. |
|
£4.75 |
|
Q1675 |
Spin-on oil filter, late 885, 990/5/6,
1210/12, 90 & 94 series etc. |
|
£4.75 |
|
|
Valves &
guides
|
|
|
|
11055 |
Valve,
inlet (TVO)
|
|
£17.50 each |
|
K64402 |
Valve,
exhaust (TVO) plus inlet/exhaust (all 4 cyl diesel to 990)
|
|
£17.50 each |
|
31674 |
Valve
guide (TVO) plus all 4 cyl diesel to 990
|
|
£9.00 each |
|
11033 |
Valve
spring, as above
|
|
£5.00 each |
|
E3339 |
Valve, inlet & exhaust, AD3/49&55, AD4/49&55, AD6/55 |
£5.00 each | |
|
|
Crankshaft
Bearings
|
|
|
|
B2561 |
Big ends, TVO engines, all sizes |
£69.50 per engine set | |
|
B4310 |
Big ends, Diesel engines, up to 990, all sizes |
£75.00 per engine set | |
|
B4410 |
Big ends, AD4/47 engines (red + early white 990), all sizes |
£29.50 per engine set | |
|
E4503 |
Big ends, AD3/49&55,AD4/49&55, AD6/55 engines all sizes |
£6.00 per conrod pair | |
|
M3264 |
Mains, TVO & Diesel, up to 990, all sizes |
£85.00 per engine set | |
|
M4225 |
Mains, all 3 cylinder, all sizes |
£30.00 per engine set | |
|
M3323 |
Mains, AD4/47,49&55 engines (all 990,1200etc.) all sizes |
£30.00 per engine set | |
|
W2058 |
Thrust bearing set, TVO & Diesel, up to 990, std. or + 0.05” |
£10.00 per. set | |
|
E928542 |
Thrust bearing set, AD3/49, 3/55, 4/49 & 4/55 engines, std. |
£10.00 per. set | |
|
Cylinder Liners & Seals |
|||
|
10041 |
VAK1, VIG1, VAK1A, no seal grooves. |
£49.50 each | |
|
30375 |
Early Cropmaster, seal land dia. 4”, grooves 0.222” wide |
£49.50 each | |
|
900131 |
3 ½” bore, straight, seal land dia. 4.124”, grooves 0.222” wide |
£39.50 each | |
|
900132 |
3 5/8” bore, straight, outer dimensions as above |
£39.50 each | |
|
10054 |
Rubber seal for bottom of above liners (2 per liner) |
£1.70 each | |
|
900084 |
3 ½” bore, stepped, seal land dia. 4.075”, grooves 0.153” wide |
£39.50 each | |
|
902001 |
3 5/8” bore, stepped, outer dimensions as above |
£39.50 each | |
|
66385 |
Rubber seal for bottom of above liners (2 per liner) |
£1.70 each | |
|
10003 |
Copper spacing ring for top of cylinder liner, 0.016” thick |
£8.95 each | |
|
10003A |
Copper spacing ring for top of cylinder liner, 0.020” thick |
£8.95 each | |
|
E2090 |
Liner, AD4/47 engines |
£25.00 each | |
|
Pistons & Rings |
|||
|
Numbers without suffix letter are the most common sizes fitted. |
|||
|
01150 |
3 ½” bore TVO, compression rings 1/8” wide |
£52 per engine set | |
|
01150L |
3 ½” bore Lamp Oil (as above + extra oil ring below gudgeon pin) |
£79 per engine set | |
|
01150A |
3 ½” bore TVO, compression rings 3/32” wide |
£52.00 per engine set | |
|
01151 |
Piston ring set 3 5/8” bore TVO, compression rings 1/8” wide |
£52.0 per engine set | |
|
01151A |
Piston ring set 3 5/8” bore TVO, compression rings 3/32” wide |
£52.00 per engine set | |
|
01152 |
Piston ring set 3 ½” bore Diesel, compression rings 1/8” wide |
£52.00 per engine set | |
|
01152A |
Piston ring set 3 ½” bore Diesel, compression rings 3/32” wide |
£52.00 per engine set | |
|
01153 |
Piston ring set 3 5/8” bore Diesel, compression rings 1/8” wide |
£52.00 per engine set | |
|
01153A |
Piston ring set 3 5/8” bore Diesel, compression rings 3/32” wide |
£52.00 per engine set | |
|
E2093 |
Piston ring set, 100mm. bore, AD3/49, 3/55, 4/49, 4/55 & 6/55 |
£13.00 per piston set | |
|
E3922 |
Piston complete with rings, 3 5/8” bore Diesel |
£69.00 each | |
|
E2088 |
As above, AD4/47 engines |
£45.00 each | |
|
E2092 |
As above, 100mm bore Diesel, AD3/49, AD4/49 engines |
£49.00 each | |
|
E3593 |
As above, 100mm bore Diesel AD3/55, AD4/55 engines |
£49.00 each | |
|
Miscellaneous Engine Parts |
|||
|
10660 |
Manifold stud, 3/8”BSF, stainless steel, T.V.O. & petrol engines | £4.00 each | |
|
11083 |
Manifold stud, 7/16”BSF, stainless steel, T.V.O. & Petrol engines | £4.25 each | |
|
01021 |
Brass manifold nuts, T.V.O. & petrol engines, 6 per set |
£10.00 per set | |
|
01157 |
Big end lock tab set (8), all 4cyl. up to 990 |
£4.50 per set | |
| 01158 |
Main bearing lock tab set (4double, 2 single), as above. |
£6.75 per set | |
|
01159 |
Flywheel lock tab, as above. | £5.50 each | |
|
10015 |
Governor drive gear bush, T.V.O. & petrol engines |
£4.75 | |
|
19041 |
Governor thrust bearing, T.V.O. & petrol engines |
£46.50 | |
|
K948427 |
Oil filler cap, AD4/49 & AD4/55 engines, bayonet type |
£9.50 | |
|
K948427 |
Oil filler cap, AD4/49 & AD4/55 engines, screw in plastic type |
£12.50 | |
|
K950287 |
Oil filler tube, threaded type to suit above cap |
£35.50 | |
|
908255A |
Exhaust manifold drain tube assy., all 3cyl, all 4cyl. 990 onwards |
£15.00 |
All prices shown excluding VAT
Delivery charges within the UK
mainland only
Deliveries to other countries available at extra cost, please ask for details
For export orders customer is responsible for payment of local import taxes
& customs duty as necessary
For orders and further information contact Peter Williams
Updated Sunday, 14 January 2007
