David
Brown Parts
David
Brown PartsIndividual Gaskets
| Part No | Description |
Thumbnail |
Price |
|---|---|---|---|
| 13C | Valve cover | ||
| K907338 | All 3 cylinder | £4.80 | |
| 10408 | All T.V.O. | £11.75 | |
| K905229 | AD4/47, AD4/49 & AD4/55 engines, all 990, 995, 996, 1200, 1210, 1212, 1410, 1412, 1290, 1390, 1490, 1294, 1394, 1494) | £5.00 | |
| K907344 | AD6/55 (1690, 1690 turbo, 1594, 1694), 2 per. engine | £2.50 each | |
| 13D | Cylinder head | ||
| 01182 | 2D, copper sandwich type | £29.50 | |
| K26275 | All 3 cylinder | £18.00 | |
| K34681 | All T.V.O., copper sandwich | £43.00 | |
| K902330 | 3.5” bore Cropmaster diesel, 25D & 850 | £43.00 | |
| K262763 | 3.625” bore Cropmaster diesel, 30D, 900, 950, 4cyl. 880 | £43.00 | |
| 901848 | 50D & 50TD, top quality, copper sandwich construction | £165.00 | |
| K262772 | AD4/47 engine (990 Implematic & early 990 Selectamatic) | £24.00 each | |
| K262750 | AD4/49 & AD4/55 (late 990 Selectamatic, 995, 996, 1200, 1210, 1212, 1410, 1412, 1290, 1390, 1490, 1294, 1394, 1494) | £24.00 each | |
| K965964 | AD6/55 (1690, 1690 turbo, 1594, 1694) 2 per. engine | £15 each | |
| 13E | Manifold | ||
| 10423 | All T.V.O. & petrol | £9.75 each | |
| 31811 | Cropmaster Diesel, 25D, 30D, 850, 900, 950, 4cyl. 880 | £9.75 each | |
| K907911 | 3 cylinder diesel inlet | £3.50 each | |
| K262756 | Inlet, AD4/47,AD4/49 & AD4/55 engines, all 990, 995, 996, 1200, 1210, 1212, 1410, 1412, 1290, 1390, 1490, 1294, 1394, 1494) | £6.50 per engine set (4) | |
| K907343 | Centre exhaust ports, AD4/49 & AD4/55 engines (1 per. engine) | £1.80 each | |
| K907344 | End exhaust ports; (2 on above engines); all 3-cylinder engines (3 per engine); AD6/55 engines (6 per. engine). | £1.50 each | |
| 35020 | Manifold to exhaust adaptor, all 4cyl | £3.60 | |
| K912441 | Manifold to exhaust adaptor, all 3cyl | £4.00 | |
| 13F | Timing case | ||
| 10032 | T.V.O. early (gear driven dynamo or no electrics) | £5.50 | |
| 33400 | T.V.O. late, (12V, belt driven dynamo) | £5.50 | |
| K68337 | Cropmaster diesel, 25D, 30D, 900, 850, 950, 4cyl 880 | £5.50 | |
| K262735 | All 3 cylinder | £7.35 | |
| K910597 | AD4/47 engine (990 Implematic & early 990 Selectamatic) | £12.75 | |
| K920794 | AD4/49 & AD4/55 (late 990, 1200 onwards) | £10.50 | |
| 13G | Sump | ||
| K907585 | All 3 cylinder | £4.00 | |
| K10042 | Paper, all early 4 cylinders, cast sump. | £3.00 | |
| 10043 | Sump drain plate, paper, 4 cylinder, cast sump. | £1.60 | |
| K918684 | Cork, for pressed steel sumps, 4 cylinder + 1690, 1594 & 1694 | £7.80 | |
| 13H | Miscellaneous gaskets, TVO & petrol engines only | ||
| 10464/5 | Hot spot plate, pair, VAK1, VIG1 | £10.00 | |
| 10694 | Hot spot cover plate, VAK1A & Cropmaster onwards | £4.00 | |
| 10417 | Carburettor to manifold | £0.50 | |
| K11622 | Water pump support plate to head | £2.50 | |
| 10621 | Front oil seal housing (crankshaft) | £1.75 | |
| 12409 | Governor cover to timing case | £1.75 | |
| 12412 | Governor bearing housing/dynamo | £1.75 | |
| 13J | Miscellaneous gaskets, Diesel engines only | ||
| K907333 | Tappet (side) cover (x2 for all 3 cylinder engines) | £2 each | |
| K31935 | Water pump support plate to head, up to 900 | £4.00 | |
| K901913 | Water pump support plate to head, 750, 850, 4cyl.880, 950 | £2.00 | |
| K262823 | Water pump, AD4/47 engine | £2.00 | |
| K262878 | Water pump, all 3 cylinder engines | £2.00 | |
| K262880 | Water pump, AD4/49 & 4/55 engines, flat backplate | £2.00 | |
| K924844 | Water pump, AD4/49 & 4/55 engine, recessed backplate | £2.00 | |
| 31818 | Timing case to injector pump mounting bracket, Cropmaster | £2.00 | |
| 31925 | Timing case to injector pump, 25D &, single seat 30D | £2.00 | |
| 87895 | Support flange, injector pump drive, 750, 850, 900, 4cyl. 880, 950 | £2.50 | |
| K68349 | Timing case to injector pump, rotary injector pump | £0.50 | |
| 13K | Miscellaneous gaskets, T.V.O., Petrol & Diesel Engines | ||
| K10030 | Tappet (side) cover (x2 for all 4 cylinder engines) | £2.50 each | |
| 12027 | Oil filter lid (early, vertical filter housing) | £2.50 | |
| 35996 | Oil filter housing to engine block (up to 950) | £2.00 | |
| K11660 | Water pump to support plate, up to 990 | £3.50 | |
| K30653 | Thermostat, up to 990 | £1.00 | |
| 10405 | Water distribution tube end (rear), up to 990 | £1.00 | |
| 10037/8 | Crankcase to chassis, all 4 cylinder up to 990 | £10.50 per. pair | |
| 13L | Seals, T.V.O., Petrol & Diesel Engines | ||
| 30336S | Inlet valve stem seal, replaces part no 30336, up to 990 | £1.50 each | |
| K940481 | Inlet valve stem seals, 3cyl. + 990 onwards | £3.95 each | |
| 31684 | Decompressor shaft “O” ring, early diesels | 60p per set of 4 | |
| 31787 | Injector sleeve “O” ring, Cropmaster Diesel, 25D, 30D, 900 Diesel | £1.00 per set of 4 | |
| 901092 | Injector sealing washer, copper, all diesel engines, 950 onwards | £1.00 each | |
| 10603 | Front crankshaft seal, felt, T.V.O., petrol & some early diesels | £3.50 | |
| K14956 | Front crankshaft seal, most 4cyl diesel up to 990 | £9.50 | |
| K628127 | Front crankshaft seal, 3cyl. + 990, 1200 etc | £11.00 | |
| K623454 | Felt seal, fits behind above | £3.90 | |
| K262784 | Rear crankshaft seal, (both halves) 3cyl. + 4cyl. 990 onwards | £7.50 per. pair | |
| K10039/40 | Cork packing, crankcase front & rear, up to 990 | £6.00 per. pair | |
| 238-5220 | Oil filler/dipstick “O” ring, AD4/47 & 3cyl engines | £1.60 | |
| 10052S | Sump plug sealing washer, all engines | £1.00 |
All prices shown excluding VAT
Delivery charges within the UK
mainland only
Deliveries to other countries available at extra cost, please ask for details
For export orders customer is responsible for payment of local import taxes
& customs duty as necessary
For orders and further information contact Peter Williams
Updated Wednesday, 07 February 2007